Easy Steps, Clean Motorcycle Chain

Chain is a sensitive component of a motorcycle. And we know, if the chain is dirty, or even very dirty, will cause discomfort when we ride the motorcycle.

Dirty motorcycle chain that has been classified as serious, can potentially lead to damage to motorcycles, and possibly at worst is to cause accidents on the highway for the rider. 

Busyness, sometimes make us forget about it. it occurred to we how complicated it was to clean up that very dirty motorcycle chain, and that's exactly what's in our brain.

There are many ways to clean the chain of motorcycles. ranging from traditional to modern. we think this modern way will help you in cleaning dirty motorcycle chains, even if you have to spend a little money for this way.

So, Now What Do You Need...

• Cleaning brush (can use a used toothbrush)
• Cleaning cloth
• Lubricant Liquid
• Cleaning fluid / spray
• Flowing water

Now, The Step...

For the step, is actually very easy. Although easy, there are still many people who still do not understand it. so it will cause damage to the chain of his motorcycle. So, if you do not want that to happen to you, you should follow the steps below,

1. Make sure the motorcycle is warm

Motorcycle Stand | Image Source : Google Images

Okay, the warm state here means the normal conditions when the motorcycle is already in use, so the engine and chain temperature is not too hot. For example, when you have just used it to travel, make sure that the temperature of the motorcycle becomes normal first.

2. Spray and clean the chain

Cleaning Motorcycle Chain With Liquid | Image Source : Google Images

To make it easier, position your motorcycle as comfortable as possible for easy cleaning process. Spray with a special liquid to clean the chain of motorcycle first. The purpose of this spraying is, to make it easier to remove the stains that are difficult to clean.

3. Clean the chain using a brush

Cleaning Motorcycle Chain With Grunge Brush | Image Source : Google Images

The next step is, cleaning the chain using a brush. Brush brush on the motorcycle chain, until the stain is completely lost.

Be careful when cleaning the motorcycle chain. Do not let your hands be exposed to sharp Sprocket surfaces. To minimize the occurrence of it, it would be nice if you use protective gloves first.

4. Clean the Sprocket

Cleaning Motorcycle Sprocket | Image Source : Google Images

The sprocket is the part on the motorcycle that is directly connected to the chain. if your sprocket is still dirty then dirt will again stick to your motorcycle chain.

Then, also clean the sprocket so that it will make the chain of motorcycle becomes more durable and not easy to rust.

5. Wetting the chain using running water

Wetting Motorcycle Chain Water | Image Source : Google Images

If it is felt that all parts of the motorcycle chain are brushed clean, then the next step is to wet the chain using running water.

Actually using water that is watered from scoop is also not a problem. It's just going to be less clean, especially on the deep parts. Eat it, the water flowing is strongly recommended, then wipe it clean

6. Lubricate all parts of the chain

Lubricant Motorcycle Chain | Image Source : Google Images

The last step is, smear the entire surface of the chain as well as motorcycle sprocket or gears using the lubricant that you usually use everyday.

Lubrication on chains and sprockets will additionally make your motorcycle pull easily, will also increase the durability of rust.

DONE !

Now, your motorcycle chain is now clean and ready for use to drive. this chain of care should be done regularly or periodically, and do not wait for the chain is very dirty and then cleaned.

Share this post